Press here for HELP

When selecting the tyre size it is essential to know the correct rolling diameter and when fitted, make sure there is adequate clearance for the wheel/tyre combination. Any necessary modifications to the bodywork in the wheel arch area should be effected immediately when choosing wider than standard wheel/tyre combinations.
Before fitting wheels smaller than the OE size, please make sure that there are no problems with the brake caliper clearance.
It is possible that the original tool kit may not be suitable for the removal of your alloy wheels because of differences in wrench size. Please always keep a suitable tool in your car boot for the removal of alloy wheels together with the original wheel fastening materials should it be necessary to fit your original wheel e.g. in the case of a puncture.
When fitting alloy wheels for the first time, the fixing torque should be generally checked after approx. 500 km and corrected if necessary. Please follow the manufacturer’s maintenance instructions carefully. The importer will be pleased to give you further information if required.
The recommendations found in this Technical Information must be strictly followed for every fitment. FONDMETAL S.p.A. declines any liability for improper use or application of its products as well as for assemblies or fitments that are not listed in this Technical Information guide.
We wish you many happy miles of motoring on your new FONDMETAL/RADIUS alloy wheels.